Working with Manual Machine
16.2 Measuring the tool
Main screen (for milling/turning machine)
The same scope of turning cycles is available for a milling/turning machine as in automatic
mode.
Figure 16-2
Machining options
You have the following options for machining the workpieces:
● Manual mode
● Single-cycle machining
16.2
Measuring the tool
All the options of the manual and automatic measurement are available to determine the tool
offset data (see also Section "Measure tool (Page 77)").
754
Main screen (for milling/turning machine)
Operating Manual, 05/2017, A5E40868956
Milling