Tool management
13.3 Tool types
Search functions
You have the option of searching through the lists according to the following objects:
● Tool
● Magazine location
● Empty location
13.2
Magazine management
Depending on the configuration, the tool lists support a magazine management.
Magazine management functions
● Press the "Magazine" horizontal softkey to obtain a list that displays tools with magazine-
related data.
● The Magazine / Magazine location column is displayed in the lists.
● In the default setting, the lists are displayed sorted according to magazine location.
● The magazine selected via the cursor is displayed in the title line of each list.
● The "Magazine selection" vertical softkey is displayed in the tool list.
● You can load and unload tools to and from a magazine via the tool list.
13.3
Tool types
A number of tool types are available when you create a new tool. The tool type determines
which geometry data is required and how it will be computed.
Note
Turning on milling machine
If you are working on a milling/turning machine, when creating tools, turning tools are also
available in addition to drilling, milling and special tools.
628
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Operating Manual, 05/2017, A5E40868956
Milling