Tool management
13.12 Sorting tool management lists
Note
Measuring tools type 713 / 714
So that the tools "L button" and "star probe" are displayed in the graphic tool display, enter in
the "More data" window the additional Parameter "Boom length" or "External diameter".
Switching the graphical magazine display on/off
13.12
Sorting tool management lists
When you are working with many tools, with large magazines or several magazines, it is useful
to display the tools sorted according to different criteria. Then you will be able to find a specific
tool more easily in the lists.
Procedure
...
666
1.
The tool list or wear or magazine list is opened.
2.
Press the "Continue" and "Settings" softkeys.
The "Settings" window appears.
3.
Activate the check box "Switch on graphic magazine display" in order to
change into the non-graphic display of the lists.
1.
Select the "Parameter" operating area.
2.
Press the "Tool list", "Tool wear" or "Magazine" softkey.
3.
Press the ">>" and "Sort" softkeys.
The lists are displayed sorted numerically according to magazine location.
Tool types are used to sort tools with the same magazine location. Iden‐
tical types (e.g. milling cutters), in turn, are sorted according to their radius
value.
Operating Manual, 05/2017, A5E40868956
Milling