10. Positions
11. Obstacle
Note
If this obstacle cycle is not inserted, the drill will violate the right-hand corner of the island
contour. Alternately, you could increase the safety clearance.
Milling
Operating Manual, 05/2017, A5E40868956
1.
Press the "Drilling", "Positions" and "Drilling Positions" softkeys.
The "Any Positions" input window opens.
2.
Enter the following parameters:
Z0
X0
Y0
X1
Y1
3.
Press the "Accept" softkey.
1.
Press the "Drilling", "Positions", and "Obstacle" softkeys.
The "obstacle" input window opens.
2.
Enter the following parameters:
Z
3.
Press the "Accept" softkey.
Creating a ShopMill program
9.18 Example, standard machining
Right-angled
-10abs
15abs
15abs
165abs
15abs
2abs
313