Nc Memory; Local Drive - Siemens SINUMERIK 840D sl Operating Manual

Managing programs
14.1 Overview
Figure 14-2
See also
Multiple clamping (Page 730)
14.1.1

NC memory

The complete NC working memory is displayed along with all tools and the main programs
and subroutines.
You can create further subdirectories here.
Proceed as follows
14.1.2

Local drive

Workpieces, main and subprograms that are saved in the user memory of the CF card or on
the local hard disk are displayed.
For archiving, you have the option of mapping the structure of the NC memory system or to
create a separate archiving system.
684
Active program shown in green
1. Select the "Program manager" operating area.
2. Press the "NC" softkey.
Operating Manual, 05/2017, A5E40868956
Milling