Call Work Offsets - Siemens SINUMERIK 840D sl Operating Manual

Creating a ShopMill program

9.10 Call work offsets

Parameter
Tool-spec. function 2
Tool-spec. function 3
Tool-spec. function 4
DT
Programmed stop
Stop
9.10 Call work offsets
You can call work offsets (G54, etc.) from any program.
You define work offsets in work offset lists. You can also view the coordinates of the selected
offset here.
Procedure
290
Description
User machine functions on/off
User machine functions on/off
User machine functions on/off
Dwell time in seconds
Time after which machining is continued.
Programmed stop on
Stops machining at the machine if, under Machine in the "Program control"
window, the check box "Programmed stop" was activated.
Stop on
Stops machining at the machine.
1. Press the "Various", "Transformations" and "Work offset" softkeys.
The "Work offset" window opens.
2. Select the desired work offset (e.g. G54).
3. Press the "Accept" softkey.
The work offset is transferred into the work plan.
Unit
s
Operating Manual, 05/2017, A5E40868956
Milling