Table of Contents
Advertisement
Recalling Scenes
Video conditions that are saved to a scene can be selected
as the program video. Previously saved scenes are
displayed in the [Scene] list.
For details on saving scenes, see "Creating Scenes"
(page 64).
1
Select the preset you want to recall in the [Scene] list.
The scene appears in the [NEXT] viewer.
When you select a scene...
...the selected scene appears in
the [NEXT] viewer.
2
Tap [Take] or [Cut] to switch the video.
When a title or logo is protected
If the
icon appears on a title or logo button in the
[Option] menu, the content of the current title or logo is
protected.
In such cases, the current title or logo configuration will
be unaffected and retained, even if a scene is recalled.
For details, see "
8
66
Tracking Targets (Tracking Function)
(protect) icon" (page 35).
Tracking Targets
(Tracking Function)
Using the tracking function allows you to perform the
following controls.
• Tap a person or other target in the [NEXT] viewer to
track them (tracking mode).
• Tap a position in the [NEXT] viewer to center the
camera on that position (framing mode).
We recommend using your camera's HD output.
Tracking may not be possible or tracking performance
may deteriorate in the following cases.
• Subject
– The subject moves too quickly.
– The subject moves out into the distance away from
the camera.
– The size of the subject changes significantly.
– The appearance of the subject's clothes varies
significantly depending on the angle in which it is
viewed.
– The subject's posture changes significantly.
– The subject is too small or too large.
• Environment
– The camera is shaking significantly.
– The background includes a variety of colors.
– There is low contrast between the subject and the
background.
– The subject and the background are similar in color.
– A portion of the subject becomes obscured by an
obstruction.
– The subject moves past another person.
– The brightness of the subject changes due to a light
(e.g., projector).
Preparation
Perform the following before using the tracking mode.
• Position the camera so that it faces the subject directly.
• Smooth tracking may not be possible if the camera is
positioned too far. Adjust the camera's position if
adjustments to the [Speed] setting are not sufficient.
• Set [Pan Reverse] and [Tilt Reverse] to [On] if the
camera's "IMG-FLIP" function is enabled or set them
to [Off] if the camera's "IMG-FLIP" function is
disabled, and then save the setting to [Preset_1].
Advertisement
Table of Contents
