Sony AWS-750 Operating Instructions Manual page 45

When you select a title in the [Title 1] list, the title
appears in the [NEXT] viewer.
Select the title you want to insert.
If the image includes an alpha channel,
a checkered pattern appears in the
areas where the background image will
be displayed.
To adjust the appearance of composites
When you select the title you want to adjust in the
[Title 1] list, the [Title 1] tab appears in the sub
screen. Tap the [Title 1] tab to display the [Title 1]
screen, and drag the sliders to perform adjustments.
[Clip]: Adjust the amount of background loss (i.e.,
clip value) within a range of 0.00 to 100.00.
[Gain]: Adjust the sharpness of outlines (i.e., gain
value) within a range of –100.00 to +100.00.
[Density]: Adjust the transparency of the title within
a range of 0.00 to 100.00.
Tip
Depending on the values configured for each setting,
the title may not be displayed. In such cases, tap
[Reset] to restore the original state, and perform
adjustment again.
4
Tap .
The [Title 1] list closes, and the [Option] menu
appears again.
The thumbnail of the selected title appears on the
[Title 1] button.
Tapping the button again removes the title display
(i.e., the title will be in its disabled state).
Displayed
Enabled
45
Inserting Titles