Lighting Tallies On Remote Cameras; Using The Gui Tally Function - Sony AWS-750 Operating Instructions Manual

Lighting Tallies on Remote
Cameras
The tally on a remote camera will light while its video is
being used for PGM output. (This does not require any
configurations.)
Tip
The tallies on remote cameras do not support lighting in
response to NEXT selection.
Using the GUI Tally
Function
You can display tallies on the source buttons in the
[Input] list that light for the sources being used as the
PGM output and NEXT selection sources.
Tally display example:
PGM output: Red
NEXT selection: Green
Tips
• The [Input] list is the only list in which the tallies
appear.
• Tallies will appear or disappear when [Take] is tapped,
regardless of transition settings.
1
Display the [System Setup] screen in the sub screen,
and tap [Others].
2
Tap [Customize GUI] to display the [Customize
GUI] screen.
3
Select [On] for [Tally].
51

Using the GUI Tally Function