Radion Repeater - Bosch ICP-EZM2 System Reference Manual

Easy Series Control Panel
Current (operating)
Voltage (operating)
Environmental
Relative humidity
Operating temperature
Mechanical
Board dimensions
Wiring
Data bus wire gauge
USB cable
Data bus wire length
8.6

RADION repeater

The RFRP is a combined receiver and transmission device that improves the overall
transmission, communication, and reliability capabilities of its assigned compatible receiver.
An LED on the front provides device status.
Features include:
–
–
Notice!
The repeater is designed to improve the communication performance of the RADION wireless
portfolio, and not to extend the range of the wireless devices. Install the transmitters within
the suggested range for optimal performance and reliability.
Notice!
Use a supported transformer as defined in the specification table for the repeater. Do not
connect power supply to a receptacle controlled by a switch.
Bosch Security Systems, Inc.
LED Display
Cover and Wall Tamper protection
System Reference Guide
Standby: B450 with B440/B441/B442/B443 = 60 mA
Alarm: B450 with B440/B441/B442/B443 = 180 mA
(B450 bus operation): 12 VDC nominal
Up to 93% at +32°C (+90°F) non-condensing
0°C to +50°C (+32°F to +122°F)
79 mm x 128 mm x 38 mm (3.11 in x 5.03 in x 1.50 in)
12 AWG to 22 AWG
USB cable (Type A to A male-to-male) – not supplied
Maximum Distance
– wire size:
22 AWG (0.65 mm) --> 12 m (40 ft)
18 AWG (1.0 mm) --> 30 m (100 ft)
16 AWG (1.3 mm) --> 48 m (158 ft)
12 AWG (2.0 mm) --> 122 m (400 ft)
Using a separate power supply, such as the B520 Auxiliary
Power Supply Module , connected to the B450 within the
specification listed above, the wire distance can be extended
up to 300 m (1000 ft)
Device Specifications and Overview | en
2014.09 | 01 | F.01U.306.221
75