Bosch ICP-EZM2 System Reference Manual page 19

Easy series control panel
Hide thumbs Also See for ICP-EZM2:
Table of Contents

Advertisement

Easy Series Control Panel
Callout
4
5
6
7
8
9
10
11
12
Note: The system uses a 12 VDC battery, connected as shown.
Bosch Security Systems, Inc.
Description
B426 Network
Interface Module
B450 Conettix
Plug-in
Communicator
Supervised Points
Normally open and normally closed options (2.2k Ω)
(single EOL)
Supervised Points
Normally closed (2.2k Ω)
(dual EOL)
Keyswitch Options (single and dual EOL) ((2.2k Ω)
Prog Output (PO) 1
Switched 12v
Options
Prog Outputs 2 - 4
NF A2P requires that sirens have a backup battery. When this
siren requires a 14,1V to 14,4V supply, use the optional board
EZPS-FRA or the auxiliary power supply IPP-PSU-2A5. Set the
output as interior burglary alarm.
2-wire Smoke
EOL resistor (P/N: 25899) required.
Detector Option
4-wire Smoke
EOL resistor (P/N: 25899) and Bosch EOL relay module
Detector Option
required
System Reference Guide
Use address 6.
Use address 6.
Switched Ground
Dry Contact
2014.09 | 01 | F.01U.306.221
Overview | en
19

Advertisement

Table of Contents
loading

Table of Contents