HP 800 User Manual page 330

802.1X Quarantine Method
Setting Up the 802.1X Components
11-46
Windows Main Window>>Start>>Settings>>Control Panel>>Administrative
Tools>>Services
1. Wireless Zero Configuration (this service needs to be started, if not
already running the user needs to right-click on the service named
Wireless Zero Configuration and click 'start').
Right-click on Local Area Connection. The Local Area Connection windows
2.
appears, as shown in Figure 11-32 on page 11-45.
3. Select Properties (Figure 11-32 on page 11-45).
4. General tab –
Select the Show icon in notification area when connected check box.
a.
This enables the Windows XP balloon help utility, which can assist you
when entering information and troubleshooting errors.
5. Authentication tab –
Select the Enable IEE 802.1X authentication for this network check box.
a.
b. Select an EAP type from the drop-down list. For this example, select
MD5-Challenge.
Important: This EAP type must match the EAP type selected in
"Setting up the RADIUS Server", step 7, step q on page 11-19.
Clear or select the Authenticate as computer when computer information
c.
is available check box. The choice is yours.
Click OK.
6.
7. Select to reboot if necessary.
How to enable a Windows 2000 Professional endpoint for 802.1X:
Windows Main Window-> Start-> Settings->Control Panel>>Administrative
Tools>>Services
1. Wireless Configuration (this service needs to be started, if not already
running the user needs to right-click on the service named Wireless
Configuration and click 'start').
Right-click on Local Area Connection. The Local Area Connection windows
2.
appears, as shown in Figure 11-32 on page 11-45.
Select Properties (Figure 11-32 on page 11-45).
3.
4. General tab –