Advanced Settings; Setting The Agent Read Timeout; Setting The Rpc Connection Timeout - HP 800 User Manual

System Configuration

Advanced Settings

Figure 3-52. System Configuration Window, Advanced Option
3-114

Advanced Settings

This section describes setting the timeout periods. Endpoint detection is
described in "Working with Ranges" on page 13-39.

Setting the Agent Read Timeout

To set the Agent read timeout period:
NAC 800 home window>>System configuration>>Advanced
1. Enter a number of seconds in the Agent read timeout period text field. The
agent read time is the time in seconds that NAC 800 waits on an agent
read. Use a larger number for systems with network latency issues.
Click ok.
2.

Setting the RPC Connection Timeout

To set the RPC connection timeout period: