HP 800 User Manual page 305

right-click on the template, select properties, and change the
permissions for your user) on the certificate authority. The Computer
or RAS and IAS templates both work.
k. Once the Certificate is granted by the certificate authority, return to
the IAS policy editor to continue the setup.
l. Click Configure to configure the certificate for use with the PEAP
authentication method. The Protected EAP Properties window
appears (figure 11-18).
m. Select the certificate you created in the previous steps, select the EAP
types you want to use, and click OK.
n. Once the Certificate is granted by the certificate authority, edit the
IAS policy.
o. On the authentication tab click authentication methods.
p. Select PEAP and click Edit.
Select the new certificate and click Apply.
q.
r. Click Configure to configure the certificate for use with the PEAP
authentication method. The Protected EAP Properties window
appears, as shown in the following figure:
Figure 11-18. Protected EAP Properties
802.1X Quarantine Method
Setting Up the 802.1X Components
11-21