HP 800 User Manual page 225

NOTE:
NOTE:
Test name
checkAntiVirusUpdates.String.1
checkAntiVirusUpdates.String.2
checkAntiVirusUpdates.String.3
checkAntiVirusUpdates.String.4
checkAntiVirusUpdates.String.5
checkAntiVirusUpdates.String.6
checkAutoUpdateStatus.String.1
checkAutoUpdateStatus.String.2
the software from this location <a href='http://
myserver.someplace.com/dir/application.exe'>Location
Name</a>",
"name2" : "message2",
}
A "%s" in the description text is a special variable that is interpolated into
extra information (passed from NAC 800) such as lists of missing patches, or
missing software.
While editing the description avoid the use of double quotes "". Use single
quotes instead. Double quotes will get interpreted by the software and can
cut the string short or cause the replacement to fail.
2. Restart the nac process by entering the following command:
service nac restart
Table 5-1.Default Test Names and Descriptions
Description
The required anti-virus software was not found. Install anti-
virus software and keep the virus definitions up-to-date.
Supported Anti Virus software: %s,
%s is installed but the service is not running and the virus
signatures are not up-to-date (installed: %s required: %s).,
%s is installed but the service is not running.,
(version: %s),
%s is installed but the virus signatures are not up-to-date
(installed: %s required: %s).,
The %s service is running and virus signatures are up-to-
date.,
The OS is not relevant to this test.,
The auto_update_level_required parameter is required.,
End-user Access
Customizing Error Messages
5-41