System Operation Questions - Bosch ICP-EZM2 Installer's Manual

.
I want to use the Custom Protection feature. How do I turn it on?
Follow these steps:
1. Start a phone session. Refer to Section 1.3 Basic Operation Information on page 4 for instructions.
2. Enter the installer passcode.
3. Press [4] to select Expert Programming.
4. Enter the appropriate expert programming item number.
Use Expert Programming Item Numbers 9013 to 9323 to set the Custom Protection option for each desired point.
The middle digits = the point number. For example, "01" = Point 1, and "32" = Point 32.
•
For Point 1, press [9][0][1][3].
•
For Point 2, press [9][0][2][3].
•
For Point 3, press [9][0][3][3].
•
For Point 10, press [9][1][0][3].
•
For Point 20, press [9][2][0][3].
•
For Point 32, press [9][3][2][3].
5. Press [1] to include the point in Custom Protection.
24-Hour, Fire Verified, Fire Instant, and Panic points always create alarm conditions regardless of the selected
protection mode.
6. Repeat Steps 4 and 5 to include additional points in Custom Protection.
7. Press [#] repeatedly until you hear the system say "goodbye."
Custom Protection is now an active protection mode selection. Only the points selected in Steps 4 and 5 turn on
when you turn on the system in Custom Protection mode.
Custom protection points also turn on when you turn on the system as either Occupied or Unoccupied.
7.6.2

System Operation Questions

Will the system work if the voice module is different than the programmed country code?
Yes. The voice module operates independently from the programmed country code.
How do I add a user or token or key fob?
Only the master user can add a user or token or key fob.
From the control center:
1. Press and hold [3].
2. When asked, present the master user token or enter the master user passcode.
3. Press [1] to add a new user.
4. Enter a passcode. Re-enter the new passcode when asked.
The system announces that the passcode was added.
5. Press [1] to add a token to the new user.
6. Present the token to the control center when asked.
The system announces that the token was added.
7. Press [2] to record a user description (optional).
8. Press [4] to add a key fob (optional).
9. Repeat Steps 3 to 8 to add more users and tokens, or press [5] to exit.
From a phone:
1. Start a phone session. Refer to Section 1.3 Basic Operation Information on page 4 for instructions.
2. When asked, enter the master user passcode.
3. Press [4] to select the User Menu.
4. Follow Steps 3 to 8 above to add users and tokens, or press [#] to exit.
If you are the master user and you cannot enter the User Menu when you present your token, you must assign your token
as the master user token. Use the master user passcode to enter the User Menu, and then assign a token to yourself.
My token does not work when I present it to the control center. How do I fix this?
Your token is not assigned to you. If you are not the master user, see the master user.
If you are the master user, refer to the previous question for instructions on adding a token to a user.
Bosch Security Systems, Inc. | 5/07 | F01U025147-01
Easy Series (ICP-EZM2) | Installer Guide | 7.0 Reference Materials
65