Expert Programming - Bosch ICP-EZM2 Installer's Manual

Easy Series (ICP-EZM2) | Installer Guide | 4.0 Programming
4.3

Expert Programming

Only use expert programming if you have a special programming requirement.
To comply with specific agency requirements, refer to Section 7.7 Agency Approvals and
Requirements on page 68 for any necessary programming changes.
Expert programming allows access to all programming categories for full system configuration:
•
System
•
Communicator
•
Report routing
•
Points
•
Outputs
•
Control centers
•
Users
Each category consists of several related programming items. Each programming item is assigned a three- or
four-digit number.
1
System
Maintenance
2
User Menu
3
Basic
Programming
4
Expert
Programming
1. Enter an expert programming item number.
Installer passcode
4-digit default: 5432
6-digit default: 543211
2. Enter the desired value using your phone's keypad.
3. Repeat Steps 1 and 2 to configure other programming items, or press [#] to exit
Installer
Phone
Menu
5
Two-Way
Voice Session
6
Custom
Messages
7
Programming
Key
#
36
For example, 201, Phone Line Supervision.
For example, press [1] to enable phone line supervision.
Expert Programming.
Exit installer menu and end phone session.
Bosch Security Systems, Inc. | 5/07 | F01U025147-01