Secure The Enclosure (Step 12); Program The Control Panel (Step 13); Test The System (Step 14) - Bosch ICP-EZM2 Installer's Manual

Easy Series (ICP-EZM2) | Installer Guide | 2.0 Installation
2.12

Secure the Enclosure (Step 12)

To secure the enclosure door:
•
Install the enclosure door lock, or
•
Secure the door with screws.
Screws not supplied.
2.13

Program the Control Panel (Step 13)

When installation is complete, you can program the control panel.
Refer to Section 4.0 Programming on page 29 for more information.
2.14

Test the System (Step 14)

When programming is complete, you must test the system for proper operation.
Refer to Section 5.0 System Test on page 56 for more information.
22
OR
Bosch Security Systems, Inc. | 5/07 | F01U025147-01