General Programming
[115] Adjust Time
Description
Used to adjust the time for checking the normality of system data. Every day at the
programmed time, the data adjustment is performed.
Selection
• Hour: 1 through 12
• Minute: 00 through 59
• AM / PM
Default
1:00 AM
Programming
1.
Enter 115.
Display: 115 TIME ADJ M/S
2.
Press NEXT to program hour.
Display example: 1:00 AM
3.
Enter the hour.
To change the current entry, press CLEAR and enter the new hour.
4.
Press
5.
Enter the Minute.
To change the current entry, enter the new minute.
6.
Press
7.
Press SELECT for AM or PM.
8.
Press STORE.
9.
Press END.
Conditions
• You cannot leave the entry empty.
• Master and slave systems are synchronized with each other.
Features Guide References
None
82
to program minute.
to program AM / PM.
Programming Guide