Panasonic KX-TD1232 Program Manual page 187

Conditions
• This program is only required if a host PBX or Centrex line is connected to the system.
Program [401] Outside Line Group Assignment is used to assign the line to an outside
line group.
• There is a maximum of four access codes per outside line group. Each code has one or two
digits, consisting of 0 through 9, and .
• If conflicting access codes (such as 8 and 81) are stored for the same outside line group, the
1-digit code (8) only will be in effect.
• When the programmed codes are dialed, Automatic Pause Insertion and Toll Restriction are
applied to the calls. The programmed pause time (in program [412] Pause Time) is
automatically inserted after the access code.
• To assign all outside line groups to one selection, press the
display shows the contents programmed for outside line group 1.
Features Guide References
External Feature Access
Host PBX Access
Pause Insertion, Automatic
Programming Guide
General Programming
key in step 3. In this case, the
187