Conditions
• Port numbers 01 through 06 are for the Master System and 07 through 12 are for the Slave,
if available.
• Refer to program [423] for the list of the ISDN port numbers and their corresponding jack
numbers.
• To assign all ports to one selection, press the
the contents programmed for Port 01.
• To assign all outside lines to one selection, press the
shows the contents programmed for CO 01.
• When you change a port number by pressing NEXT or PREV, the outside line number is
not changed.
Example #03:CO02.......Pressing NEXT....#04:CO02
Features Guide References
Night Service
Outside Line Connection Assignment — Outgoing
Programming Guide
key in step 3. In this case, the display shows
key in step 4. In this case, the display
General Programming
287