T1 Sending Tie Caller Id - Panasonic KX-TD1232 Program Manual

[723] T1 Sending TIE Caller ID

Description
Sends a caller ID on the DTMF (Dual Tone Multi-Frequency) signaling on the T1 channels
assigned TIE.
This program is available for the KX-TD1232 only.
Selection
• Outside (CO) line number:
25 through 48,
• Yes (to send) / No (not to send)
Default
All outside lines — No
Programming
1.
Enter 723.
Display: 723 TIE CALL ID
2. Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter an outside line number 25, you can also press NEXT.
Display example: CO Line NO? 25
4. Press NEXT.
Display example: CO25:No
5.
Keep pressing SELECT until the desired selection is displayed.
Display example: CO25:Yes
6.
Press STORE.
7.
To program another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
8. Repeat steps 4 through 6.
9.
Press END.
Conditions
Available for only a PBX supports a Caller ID on the DTMF.
Features Guide References
T1 Line
Programming Guide
( = all outside lines from 25 to 48)
General Programming
325