General Programming
[436] CO-to-TIE Transfer
Description
Enables or disables transferring an incoming outside call to the TIE line on an Outside (CO)
line group basis. This restriction applies to the following: 1) Call Forwarding to a TIE line 2)
Call Transfer to a TIE line.
Selection
• Outside line group (TRG) number:
1 through 8,
• Enable / Disable
Default
All outside line groups — Disable
Programming
1.
Enter 436.
Display: 436 CO-TIE XFER
2.
Press NEXT.
Display: TRK GRP NO?
3.
Enter an outside line group number.
To enter outside line group number 1, you can also press NEXT.
Display example: TRG1:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To program another outside line group, press NEXT or PREV, or SELECT and the desired
outside line group number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
None
Features Guide References
T1 Line
TIE Line Service
230
( =all CO line groups)
Programming Guide