General Programming
[601] Class of Service
Description
Programs each extension for Class of Service (COS). The COS determines the call handling
abilities of each extension.
Selection
• Jack number:
KX-TD816 — 01 through 16, (-1 / -2),
KX-TD1232 — 01 through 64, (-1 / -2),
( =all jacks, -1 = first part, -2 = second part)
• COS number: 1 through 8
Default
All jacks-1/2 — COS 1
Programming
1.
Enter 601.
Display: 601 COS #
2.
Press NEXT.
Display: Jack NO?
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack number.
Display example: #01-1:COS1
4.
Enter a COS number.
To change the current entry, enter the new number.
5.
Press STORE.
6.
To program another jack, press NEXT or PREV, or SELECT and the desired jack
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• There is a maximum of eight Classes of Service. Every extension must be assigned to a
Class of Service and is subject to the COS Programming of programs [500] through [510]
and [991].
270
Programming Guide