Motorola Netopia 2200 Series User Manual page 261

Motorola netopia 2200-, 3300- or 7000-series gateway user guide
Hide thumbs Also See for Netopia 2200 Series:
Table of Contents

Advertisement

CONFIG Commands
Internet Key Exchange (IKE) Settings
The following four IPsec parameters configure the rekeying event.
set security ipsec tunnels name "123" IKE-mode
ipsec-soft-mbytes (1000) {1-1000000}
set security ipsec tunnels name "123" IKE-mode
ipsec-soft-seconds (82800) {60-1000000}
set security ipsec tunnels name "123" IKE-mode
ipsec-hard-mbytes (1200) {1-1000000}
set security ipsec tunnels name "123" IKE-mode
ipsec-hard-seconds (86400) {60-1000000}
The soft parameters designate when the system begins to negotiate a new key. For
example, after 82800 seconds (23 hours) or 1 Gbyte has been transferred (whichever
comes first) the key will begin to be renegotiated.
The hard parameters indicate that the renegotiation must be complete or the tunnel will
be disabled. For example, 86400 seconds (24 hours) means that the renegotiation
must be complete within one day.
Both ends of the tunnel set parameters, and typically they will be the same. If they are not
the same, the rekey event will happen when the longest time period expires or when the
largest amount of data has been sent.
261

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netopia 3300 seriesNetopia 7000 series2200

Table of Contents