Status Indicator Lights
LED Function Summary Matrix
Power
Unlit
No power
Solid
Power on
Green
Flashing
N/A
Green
Red
Updating
embedded
software, or
for system
failure.
If a status indicator light does not look correct, look for these possible problems:
If LED is
not Lit
•
Make sure the power switch is in the ON position.
•
Make sure the power adapter is plugged into the DSL Router properly.
Power
•
Try a known good wall outlet.
•
Replace the power supply and/or unit.
•
Make sure that any telephone has a microfilter installed.
•
Make sure the you are using the correct cable. The DSL cable is the thinner standard tele-
phone cable.
•
Make sure the DSL cable is plugged into the correct wall jack.
DSL
•
Make sure the DSL cable is plugged into the DSL port on the DSL Router.
•
Make sure the DSL line has been activated at the central office DSLAM.
•
Make sure the DSL Router is not plugged into a micro filter.
•
Launch a browser and try to browse the Internet. If the DSL Active light still does not flash,
then proceed to Advanced Troubleshooting.
DSL
Internet
No signal
No signal
Internet con-
Router is con-
nection is
nected.
established.
Activity on the
Transmitting
DSL cable
or receiving
data.
N/A
N/A
Possible problems
Ethernet
Wireless
No signal
No signal
Synched with
Synched with
Ethernet card
WLAN
Activity on the
Activity on the
Ethernet
WLAN
cable
Bad userid
N/A
and pass-
word are
entered.
159