Use the segment argument to ping a neighbor switch.
Use the end-to-end argument to ping a remote end node.
reset dhcp client release [ vcc-id ]
Releases the DHCP lease the Motorola Netopia® Gateway is currently using to acquire the
IP settings for the specified DSL port. The
range B-I, and does not directly map to the VCC in use. Enter the
release
reset dhcp client renew [ vcc-id ]
Releases the DHCP lease the Motorola Netopia® Gateway is currently using to acquire the
IP settings for the specified DSL port. The
range B-I, and does not directly map to the VCC in use. Enter the
release
reset dsl
Resets any open DSL connection.
reset ppp vccn
Resets the point-to-point connection over the specified virtual circuit. This command only
applies to virtual circuits that use PPP framing.
show atm [all]
Displays ATM statistics for the Motorola Netopia® Gateway. The optional all argument
displays a more detailed set of ATM statistics.
show dsl [ all ]
Displays DSL port statistics, such as upstream and downstream connection rates and
noise levels.
186
command without the variable to see the letter assigned to each virtual circuit.
without the variable to see the letter assigned to each virtual circuit.
vcc-id
identifier is an "index" letter in the
reset dhcp client
vcc-id
identifier is an "index" letter in the
reset dhcp client