Fujitsu Eternus DX100 S3 User Manual page 838

Appendix A Error Messages/Error Codes
A.1 Error Messages
Message
number
E0342
E0343
E0344
E0345
E0346
E0347
E0348
E0349
E0350
E0351
E0352
E0353
E0354
E0355
E0356
E0357
E0358
E0359
E0360
E0361
The time out occurred.
A timeout occurred during AIS Connect processing. Check the network status.
The network is not normal.
The AIS Connect network is not in normal status. Check the network status.
The time out occurred in the network.
A timeout occurred in the AIS Connect network. Check the network status.
The network of IDM server is unreachable.
The network of the AIS Connect server cannot be accessed. Check the network status.
The IDM server is unreachable.
The AIS Connect server cannot be accessed. Check the network status.
The IDM server refused the connection.
The AIS Connect server refused the connection. Check the network status.
The IDM server reset the connection.
The AIS Connect server reset the connection. Check the network status.
The SSL communication fault occurred.
An SSL communication error occurred. Check the network status.
The name resolution of the host name failed.
Name resolution of the host name failed. Check the network status.
It failed in the HTTP authentication.
HTTP authentication failed. Check the authentication setting.
The HTTP authentic method does not correspond.
HTTP authentication is not supported. Check the authentication setting.
It failed in the SOCKS authentication.
SOCKS authentication for the proxy server failed. Check the authentication setting.
The SOCKS authentic method does not correspond.
SOCKS authentication is not supported. Check the authentication setting.
Export log in process.
A log is already being exported. Wait for a while and retry the command.
AIS Connect or AIS Connect server authentication is enabled.
AIS Connect function is enabled. Disable the AIS Connect function, and then retry the command.
AIS Connect is disabled.
AIS Connect function is disabled. Enable the AIS Connect function, and then retry the command.
REMCS is enabled.
REMCS function is enabled. Disable the REMCS function, and then retry the command.
Log Transmission of E-Mail Notification is enabled.
Log transmission via email notification is enabled. Disable the log transmission, and then retry the
command.
AIS SSL certificate is not registered.
A proper root certificate is not registered. Register a proper root certificate.
AIS SSL certificate is invalid.
The root certificate is invalid or has expired. Register a proper root certificate.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Message
Countermeasure for the error
838
P2X0-1210-05ENZ0