Chapter 3 Configuration Settings and Display
3.4 Flexible Tier Management > set flexible-tier-sub-pool
set flexible-tier-sub-pool
This command changes the information for the Flexible Tier Sub Pools (FTSPs) that are already registered in
the ETERNUS DX.
■
Syntax
set flexible-tier-sub-pool {-ftsp-number
■
Parameter
-ftsp-number
or
-ftsp-name
-assigned-cm
■
Example(s)
The following example automatically sets the assigned CM for FTSP0001:
CLI> set flexible-tier-sub-pool -ftsp-name FTSP0001 -assigned-cm auto
ftsp_number
This parameter specifies the FTSP identifier. Only one FTSP identifier can be specified in a
single command.
ftsp_number
FTSP number
ftsp_name
FTSP name
Optional. This parameter specifies the assigned CM for the RAID group that is added to the
target FTSP. When "auto" is specified, the assigned CM is automatically determined by the
ETERNUS DX. If omitted, the assigned CM is not changed.
0
Controller module#0
1
Controller module#1
auto
Automatically (default)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
ftsp_name
| -ftsp-name
209
} [-assigned-cm{0|1|auto}]
P2X0-1210-05ENZ0