Fujitsu Eternus DX100 S3 User Manual page 78

Chapter 3 Configuration Settings and Display
3.1 RAID Group Management > set raid-group
■ Example(s)
The following example changes the RAID group named "RGP001". The new name is "RAID002":
CLI> set raid-group -rg-name RGP001 -name RAID002
The following example changes the CM number that is associated with the RAID group named "RGP001". The
new CM number is "CM#1":
CLI> set raid-group -rg-name RGP001 -assigned-cm 1
The following example changes the CM number that is associated with RAID groups #2 and #4. The new CM
number is "CM#1":
CLI> set raid-group -rg-number 2,4 -assigned-cm 1
The following example sets a key group for RAID groups #2 and #4:
CLI> set raid-group -rg-number 2,4 -key-group enable
78
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0