Chapter 5 System Settings and Display
5.3 System Settings > show sed-key-groups
show sed-key-groups
This command displays the key group and the server certificate.
■
Syntax
show sed-key-groups
■
Parameter
No parameters.
■
Output
The following information is displayed when a key group is registered:
SED Key Group Name
Key Expiration Date
Key Status
Machine Group Name
Security Level
Recovery Mode
Period
Master Server ID
Master Server
Slave Server ID
Slave Server FQDN or IP address of the slave server. If it is not set, a hyphen (-) is displayed.
Key group name
Valid period of the key being used. If the key server is inaccessible, "Not Available" is
displayed. If a valid period is not set, a hyphen (-) is displayed.
Key status
Machine group name
Security level
Recovery mode
Valid period of the key. If a valid period is not set, a hyphen (-) is displayed.
Master server ID. If it is not set, a hyphen (-) is displayed. This information is followed by
the master server status.
FQDN or IP address of the master server. If it is not set, a hyphen (-) is displayed.
Slave server ID. If it is not set, a hyphen (-) is displayed. This information is followed by
the slave server status.
643
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
P2X0-1210-05ENZ0