Delete Flexible-Tier-Pool - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.4 Flexible Tier Management > delete flexible-tier-pool

delete flexible-tier-pool

This command deletes the Flexible Tier Pools (FTRPs) that are already registered in the ETERNUS DX. All
Flexible Tier Sub Pools (FTSPs) in the target FTRPs are also deleted. If a volume is registered in the specified
FTRP, the FTRP cannot be deleted.
Delete all volumes in the target FTRP before deleting the FTRP.
■ Syntax
delete flexible-tier-pool {-ftrp-number
■
Parameter
-ftrp-number
or
-ftrp-name
■ Example(s)
The following example deletes FTRP#01:
CLI> delete flexible-tier-pool -ftrp-number 01
The following example deletes an FTRP that is named "FTRP005":
CLI> delete flexible-tier-pool -ftrp-name FTRP05
ftrp_number
This parameter specifies the FTRP identifiers that are to be deleted. Multiple FTRPs can be
deleted in a single command.
ftrp_number
FTRP number
ftrp_name
FTRP name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
ftrp_name
| -ftrp-name
205
}
P2X0-1210-05ENZ0