Fujitsu Eternus DX100 S3 User Manual page 261

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set host-wwn-name
■ Example(s)
The following example changes the host response definition of the host named "HBA1":
CLI> set host-wwn-name -host-name HBA1 -host-response-number 2
The following example changes the host response definition of the FC hosts with consecutively numbered
identifiers #1 – #10 at the same time:
CLI> set host-wwn-name -host-number 1-10 -host-response-number 5
The following example changes the host named "HBA1". The new alias is "HBA123":
CLI> set host-wwn-name -host-name HBA1 -name HBA123
261
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0