Show Balancing-Thin-Pro-Volumes - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.2 Volume Management > show balancing-thin-pro-volumes

show balancing-thin-pro-volumes

This command displays information such as the status and progress of TPV balancing. The information of only
TPVs that are being balanced is displayed.
■ Syntax
show balancing-thin-pro-volumes [-volume-number
■ Parameter
-volume-number
or
-volume-name
■ Output
Volume
Balancing Level
Balancing Process
Work Volume No.
Error code
Elapsed Time
Optional. This parameter specifies a volume number or a volume name that is to be displayed.
Only one volume can be specified. For details, refer to
Example: -volume-number 1
An error occurs when a volume other than a TPV is specified.
volume_number
Volume number
volume_name
Volume name
Volume identifiers
No. Volume number
Name Volume name
Balancing level
Balancing process
Status Balancing process status
Progress(%) Balancing process progress
Working volume number
Error code
Elapsed time
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
volume_number
| -volume-name
"1.2.10 Volume Syntax" (page
138
volume_name
]
26).
P2X0-1210-05ENZ0