Scene Recall; Remote Fader Level Control - Sony SRP-X500P System Integration Manual

Scene Recall

The following is an example of recalling SCENE No.1 and
SCENE No.2 using two push switches.
I Setting
1. Connect two push switches to INPUT 1 and INPUT 2
of the PARALLEL REMOTE connector on the
SRP-X500P.
2. Select SCENE RECALL No.1 on the
PARALLEL/PROJECTOR CONTROL screen. This
selection appears on a drop-down list on INPUT 1.
Then select SCENE RECALL No.2 on the
PARALLEL/PROJECTOR CONTROL screen. This
selection appears on a drop-down list on INPUT 2
(Fig. 12).
I Status
The relationship between the switches and scene recall is
as follows (Fig. 13):
- Press the switch to recall the relevant scene memory.
Fig. 12 Setting of the SCENE RECALL
INPUT 1
Press switch
(SCENE RECALL
No. 1)
INPUT 2
(SCENE RECALL
No. 2)
Scene Memory
No. 1
Fig. 13 Switch and SCENE RECALL Status
Press switch
No. 2
5
Setting up the SRP-X500P Using Manager Software

Remote Fader Level Control

The following is an example of controlling the level of
MIC1 to MIC4 using the remote fader control volume.
I Setting
1. Connect a control volume to INPUT 1 of the
PARALLEL REMOTE connector on the SRP-X500P.
2. Click MIC1 to MIC4 in the REMOTE1 line on the
REMOTE FADER screen (Fig. 14).
3. Select the REMOTE FADER1 LEVEL on the
PARALLEL/PROJECTOR CONTROL screen. This
selection appears on a drop-down list on INPUT 1
(Fig. 15).
I Operation
By rotating the volume control, the user can adjust the
channel volume assigned to the remote fader. The
adjustable range is between -∞ and 0 dB. The total
volume level is the combination of MIC INPUT volume on
the front panel and REMOTE FADER volume. If MIC
INPUT volume on the front panel is set to -10 dB, the
total volume level is as illustrated in Fig. 16.
Fig. 14 REMOTE FADER Screen
INPUT 1
(REMOTE FADER 1
LEVEL)
+10dB
-10dB
Level of the
MIC INPUT volume
∞
- dB
Fig. 16 Position of the Volume and the Result
Fig. 15 REMOTE FADER Setting
-15dB
∞
-
0dB
-25dB
Total volume
∞
- dB
19