Setting Up The Srp-X500P; System Type; What Is A "System Type; System Type 1, 2 (For Av Presentation Rooms) - Sony SRP-X500P System Integration Manual

SRP-X500P System Integration Guide
4

Setting up the SRP-X500P

4-1. SYSTEM TYPE

What is a "SYSTEM TYPE"?

The SRP-X500P offers nine factory default system settings
called "SYSTEM TYPE" in its memory, enabling efficient
audio adjustment. Depending on the type of room,
speaker locations, and speaker system configurations, you
can quickly configure an audio system by recalling the best-
suited preset for each venue. If your requirements cannot
be managed by one of the nine system presets provided,
you can easily customize all system settings using the
supplied SRP-X500P Manager software.
AV Presentaion Room
SYSTEM TYPE 1 (70V LINE)
SP 2
70V LINE
(SP 3-4)
SP 1
Conference Room
SYSTEM TYPE 4 (70V LINE)
70V LINE
(SP 3-4)
Audio-Visual Room
SYSTEM TYPE 3
SP 2
SP 1
10
SYSTEM TYPE 2 (Lo-imp)
SP 2
SP 3 SP 4
SP 1
SYSTEM TYPE 5 (Lo-imp)
SP 1 SP 2 SP 3 SP 4
SYSTEM TYPE 6 to 9
SP 2
SP 4
A
SP 1 SP 3

SYSTEM TYPE 1, 2 (for AV Presentation Rooms)

SYSTEM TYPE 1 and 2 are suitable for AV presentation
rooms. This type of room needs clear voice reproduction
from microphones, and vivid sound from AV equipment
such as DVD and CD players. Satisfying both requirements,
the following may be the best speaker configuration:
• Output microphone audio from ceiling speakers to
enhance clarity
• Output AV equipment audio from the front speakers in
stereo
For ceiling speakers, both multi-connected high-impedance
speakers and high-quality low-impedance speakers can be
used.
The SRP-X500P is equipped with a four-channel digital
power amplifier (SP1 to SP4). Low-impedance speakers can
be connected to SP1 and SP2, while SP3 and SP4 can be
switched between high- and low-impedance modes. This
means you can configure systems as follows:
• SYSTEM TYPE 1: a pair of front speakers and
high-impedance ceiling speakers (70V Line)
• SYSTEM TYPE 2: a pair of front speakers and
low-impedance ceiling speakers (Lo-imp)
SYSTEM TYPE 1 (70V LINE)
LINE,
SP 2
AV/RGB R
70V LINE
(SP 3-4)
LINE,
SP 1
AV/RGB L
MIC
MIC SP 1
SP 2
LINE SRP-X500P
AV/RGB SP 3-4
(70V LINE)
IN OUT
When using high-impedance ceiling speakers
SYSTEM TYPE 2 (Lo-imp)
LINE,
SP 2
AV/RGB R
SP 3 SP 4
LINE,
SP 1
AV/RGB L
MIC
MIC SP 1
SP 2
LINE SRP-X500P
SP 3
(Lo-imp)
AV/RGB
SP 4
(Lo-imp)
IN OUT
When using low-impedance ceiling speakers