Panasonic KX-T336 System Reference Manual page 88

In AT and BT modes, used for the entry numbers
200 through 999 in TR 2 and AR2 commands, to
set "Y" or "N" to all the entry numbers that you
designated.
Input Format
$SET XXX Y/N
TX-
Cl> <2>
<I> Enter the Entry number that you want to set.
When you want to designate multiple
numbers, use N, P, X.
N: designates 2 through 9
P: 0 and 1
X: 0 through 9.
<Example>
When specifying 200 through 209, enter:
20x
When specifying 200 through 999, enter:
NXX
When specifying 200,300, 400, -.., 800, 900,
enter:
NO0
c2>
Set 7" or "N".
In AT mode, enter the number while the first item is
displayed.
$SET is ineffective after entering another item.
<Example>
Setting all the entry numbers in the Index number
1 of AR2 to "N."
- In AT mode
Enter:
Enter:
$SET NXX N (+-f )
u
All the entry numbers are set to "N"
and displays:
; Office Code Table No. 01
; 001 :Areacode
+N
; INPUT>> 0
l
In BT (Batch type) mode
Enter:
; PRG>AR2 BT 02 ( .&
u
Displays:
AR2 BT 02
u
Enter:
$SET NXX N (+f )
All the entry numbers are set to "N."
8-E-4