E. Function
Commands
In Auto type (AT) and Batch type (BT) modes of
Programming
mode, the following function com-
mands are used for ending the modes, copying
data and so on.
For details about types of modes, refer to Section
8-D-l .OO "Programming
Mode."
l
In AT mode
After storing data, concludes
AT mode.
Enter this command
after "INPUTc<fl"
is
displayed.
l
In BT mode
Concludes
BT mode in the middle of entry.
Be sure to enter this command
after comma
(,)
or slash (/).
2.00
m
fl-x-n
1 Item Number]
In AT mode, this command
enables you to read
the desired item immediately.
This function is effective for all the commands
provided with items.
<Example>
Reading Operation
command
Index 1, Item 17
(FDN for General Operator
Call)
If the following
is already displayed:
; INDEX=1
;
01 : Tenant Service
jY
; INPUT>> fl
a
Enter:
SJl7 (4
1
a
Displays:
;
17
: FDN
for General
Operator Call +
; INPUT>> fl
Every pressing of the RETURN
key displays the
next item. After the last item is displayed,
the first
item is disolaved bv oressina the RETURN
kev.