Panasonic KX-T336 System Reference Manual page 470

3.00 Basic Operation
3.01 Starting Local Mode
To enter the Local Mode, set the LOCAL switch
(on the right side of the Attendant Console) to
"ON" when call processing mode of the attendant
console is displayed, then the Local Mode Main
Menu is displayed on the screen. (See the
illustration below)
The prompt "$. is displayed on this screen and
you can enter the desired mode by entering the
appropriate command.
3.02 Ending Local Mode
To end the Local Mode, set the LOCAL switch
(on the right side of the Attendant Console) to
"OFF" when prompt '?$" is displayed on the
screen, then call processing mode of attendant
console is obtained automatically.
Command line
3.03 Command Entry
Each Main Command can be entered either by
simply pressing the associated function key or by
entering each command character at Full
keyboard.
If Sub Command is required, type it directly at
Full keyboard.
The function keys at the top of the Function
keyboard are command-entry specific.
Their functions depend on the mode you are in.
The entered command is displayed on the
command line. -'
To execute a command line, press the RETURN
key after entering the Main Command and Sub
Command (if required).
<Example>
In Extension Directory mode:
Enter: DIG> (m) (1 OOO/JacWSales)
4
t
main command sub coknmand
****************************
*
3c
*
Local mode for attendant console
. .
*
*
*
*************.***************
DIC : enter to edit mode of extension directory
SPD : entertoeditmodeofspeeddiidictionary
DIG : enter the diagnostic mode of atWant console
BUP : entertheiocaldatabackupmode
HELP : display the command information
-' CLEAR : cleartheattendantiocaldata
4 .
y Function field: display the commands to be selected by keys. c
c
Local Mode Main Menu Screen
13-A-3