Panasonic KX-T336 System Reference Manual page 189

Description of Assigning Items
Destination (DIL 1 :N only)
Type and Number
DID Digit Modification Table Assigns the digit modification table to be used for DID calls. This allows
the DID incoming digits to be modified to match the numbering plan.
PBX Access Code (No
Restriction)
In behind PBX or Centrex operation it is necessary for the system to
send an access axle to the host PBX or Centrex followed by a pause.
This feature assigns the access code to be sent.
PBX Access Code
This is the same as PBX Access Code with Pause except that the digits
(Restriction)
following the access code are checked by the system for toll restriction.
Max. Dial No. after EFA
Signal
Assigns maximum dialing digits after sending EFA (External Feature
Access) signal.
CO Appearance Type
I
This setting is not valid.
Refer to Section 3-D-2.1 0 "Flexible SCO/GCO Assignment" for further
Assigns destination type and number only when "Incoming Mode (Day)" is
set to
DIL 1.
N
(the
functon which enables an incoming call from one CO
line in one trunk group to arrive at one to eight destinations simultaneously
without assistance of operator).
Orderly setting is not necessary and inserting blanks between the items is
permissible.
Conditions
information.
Same as "Group-Trunk Group (l/2)" screen.
Function
The following functions appear on the function line of this setting screen.
COMMON (SHO LV, CHG LV, INS, OUS, REMOVE, EXIT) and HRD CPY keys are
available in all setting screens. INDEX, READ keys are also available in this
screen. The operation of function keys are described in Section 7-l "Operation of
Function Keys." Only messages are provided here.
INDEX>Trunk Group No. (01 -IS)= fl
READ>Trunk Group No. (01-l 6)= 0
a B m HEXIT @
9-E-l 1
(30393)