Panasonic KX-T336 System Reference Manual page 414

3.00 Storing Speed Dialing-System
This is used to store telephone numbers for
For further information about Speed Dialing
speed dialing which all the extension users in the
feature, refer to Section 4-C-4.02 "Speed Dialing-
system can use to call outside parties. Up to
200
System."
speed dialing codes can be stored.
Operation
1. Set PITS system program-
ming mode.
Result
* The message below appears
on the display:
SYS-PGM No? +
Comment/Note
l
Refer to Section 11 -C-l .OO
'Entering PITS System
Programming Mode."
l
The MEMORY button indicator
lights in red.
2. Dial "01." (program number)
l
Speed dialing code entry
pqpq
screen appears on the display:
Speed No? +
l
The MEMORY button indicator
light goes out.
3. Dial the appropriate speed
l
Current entry for the selected
dialing code: three digits
l
If the NEXT button is pressed,
code appears on the display:
(001 to 200).
the number for the speed
q
<Example>
dialing code '001" appears.
19.3
450
l
After the current entry is
755
100: 01,9555-1212
displayed, pressing the PREV
Y
100: Speed dialing code
button displays the number of
01 : Toll restriction level
the previous speed dialing
code.
9 : Feature number for
l
When Tenant Service is
selecting the CO line
555-1212 : Telephone number
employed,, you can store the
speed dialing codes of your
.; .-*
tenant.
l
If nothing is stored:
l
When more than 10 digit-s are
100: Not Stored
I
stored, it can be confirmed by
scrolling the display with the
*or ) button.
4. Dial the toll restriction level:
l
Dialed digits appear on the
two digits (00 to 16).
display:
l
After dialed number is
123
454
q
<Example>
displayed, " , " appears
7L)o
100: 16,
automatically.
*
Continued
11 -C-6