Table of Contents
Advertisement
Installing Discs
The CDP-CX100/CX100S allows you to
install up to 100 discs. You can assign a
name to each disc so that you can locate
the disc easily (see page 25).
Inserting Discs
1 Press POWER to turn on the player.
The display lights up.
2 Press UNLOAD.
The UNLOAD button indicator flashes.
The rotary table turns and the disc slit at
Ww
a) Playing position
The position of the current disc (disc
playing or ready to be played)
When a disc is set to the playing
position, "DISC HOLD" appears in the
display.
The UNLOAD button indicator is unlit.
b) Loading position
The position if the current disc that
can be taken out or replaced.
The UNLOAD button indicator is lit.
c) Rotary table
3 Slide the OPEN lever to the opening
position, then manually open the
front cover.
4 Rotate the JOG dial to turn the rotary
table and move any disc slit to the
loading position.
a) Disc slit at the loading position
(Current disc slit)
The disc in this slit (current disc) is
.
played first when you press
or
=
ENTER.
b) Disc number
c) Current disc number
d) Disc memo
4
You can input your original disc memo
titles instead of the current disc
numbers, "*DISC-1, 2 etc.-&" (see
page 25).
(Continued)
Advertisement
Table of Contents
