Table of Contents
Advertisement
Koco] (late melom cat-)
System
FIXED LINE OUT
VARIABLE LINE OUT
Connect the ry to an amplifier as
shown in fig. EY.
COP-CX100/CX100S
a} COMMAND MODE (CD 1-2-3) selector
s r y
o k
(Set the selector of CDP-CX100S to CD
1 to be controlled by the remote
commander RM-P332.)
b) SIRCS IN jack
c) CONTROL S (IN) connector
d) DIGITAL OUT (OPTICAL) connector
e) to an AC outlet
f) Speaker system
g) Amplifier
Notes on Connection
¢ Turn off the power to each unit before
making connections. Connect the AC
power cord tast. For the model supplied
with a plug adaptor, use it if the plug of
the power cord does not match your AC
outlet.
¢ Be sure to insert the plugs firmly into the
jacks. Loose connections may cause hum
or noise.
* Leave a little slack in the connecting cord
SPEAKER
to allow for inadvertent shock or vibration.
a
* Cord plugs and jacks are color coded:
Be
|
Red plugs and jacks are for the right
:
tt
:
channel (R) and white ones for the left
ast desis alsa
canna
When using the LINE OUT jacks
There are two ways of connecting the LINE
OUT:
FIXED: The output level is fixed.
VARIABLE: The output level can be
adjusted with the LINE OUT/PHONE
LEVEL control (or with the LINE OUT
LEVEL +/- button on the remote
commander RM-DX100.)
Notes on VARIABLE LINE OUT
* Connect your system to the VARIABLE output
when using the Level File function.
¢ If the LINE OUT/PHONE LEVEL control (or the
LINE OUT LEVEL +/- button on the remote
commander RM-DX100) is adjusted while
recording, the recording level will change even
when it is oreset on the tane deck.
Advertisement
Table of Contents
