Table of Contents
Advertisement
Installing Discs
1 Press UNLOAD.
The UNLOAD button indicator flashes,
then lights up.
2 Slide the OPEN lever to the opening
position, then manually open the
front cover.
3 Rotate the JOG dial to set the disc
slit, containing the disc you want to
remove, to the loading position.
4 Take out the disc.
Repeat steps 3 to 4 to remove more
discs.
5 Close the front cover.
Press the right edge of the cover until
the OPEN lever clicks.
When you replace a disc in a slit
Disc Memo, Delete Bank, Level File or Group File
which you assigned to the disc remains the same
even if you remove a disc. When you replace the
disc with a new one, erase or modify the above if
necessary.
To erase all files assigned to a disc
You can erase all Custom Files and Group Files
assigned to one particular disc. Set the disc to
the loading position while the UNLOAD button
indicator is lit, then hold down ERASE until "1
DISC ERASE" appears in the display. All the files
assigned to the current disc are erased (see page
24).
11
Advertisement
Table of Contents
