Table of Contents
Advertisement
10
do
a
——
et:
954
WISTS
#0 TSC -20
nal
wn
eC
aroncs
HIT
eo
nN
ot
Label side
js {2 ]3fets|
1¢ | 7 19 }9 20]
[to ]r2[r3]eafes|
[v6 ]+7 }r9]9)20]
Installing Discs
5 insert a disc vertically, with the label
facing right.
6 You can input your original disc
memo titles instead of the current
disc numbers, "*DISC-1, 2 etc.*"
(see page 25).
This is convenient when many discs are
installed, you can easily find what disc 1s
in the current disc slit.
7 Repeat step 4 to 6 to insert more
discs.
8 Close the front cover.
Press the right edge of the cover until
the OPEN lever clicks.
If you insert a disc with the label
facing left
*-NO DISC-" appears when the disc is set
to the playing position. Press UNLOAD and
re-insert the disc with the label facing right.
Note on the rotary table
You cannot rotate the table when the
UNLOAD button indicator is unlit (while a
disc is set to the playing position or while
*-NO DISC-" appears). Press UNLOAD to
turn on the indicator. The current disc slit
will come to the loading position, then you
can rotate the rotary table using the JOG'
dial.
When inserting an 8 cm (3-inch) CD
Be sure to attach the Sony CSA-8 adaptor
to the disc. Do not insert an 8 cm (3-inch)
CD without the adaptor.
Note on the front cover
Always close the front cover except when you are
inserting or replacing discs.
If you drop something under the disc slits.
[J
Slide the bottom cover to detach it. Remove the
foreign object. then slide the cover in.
Advertisement
Table of Contents
