GE GL317D Instruction Manual page 43

Identifying sub- assemblies and their packaging
Introduction
Example of marking
and identifying
Place of the plates
06- 2017
Packaging - Shipping and storage
Packaging - Identification - Storage
Each circuit- breaker sub- assembly (poles, operating mechanism, etc.) is
identified by a plate giving its reference numbers.
These numbers are marked on the packaging cases of each sub- assembly.
- Manufacturer reference No. = 101 525
- Circuit- breaker identification No. 1
- Pole No. 2
MARKING OF
PACKAGING CASES
2
101 525 0010
0101
CIRCUIT- BREAKER
IDENTIFICATION No.
Choose and install the components identified by the plate (1).
101 525 0010
o
n SÉRIE
Ozn. 01/2
OUTSIDE PLATE
INSIDE PLATE
GE Information
IDENTIFICATION OF
SUB- ASSEMBLIES AND
MANUFACTURER
REFERENCE No.
101 525 0010
o
n
Ozn. 01/2
CASE No.
1
TOOLING
1
SERIJA
POLE No.
L22- 014EN/05
3/6