Table of Contents
Advertisement
6 FORK, TRIPLE CLAMP
19
6.8
Performing a fork service
Condition
The fork legs have been removed.
-
Disassemble the fork legs. (El p. 19)
-
Remove the spring. (E8 p. 21)
-
Disassemble the cartridge. (El p. 21)
-
Disassemble the piston rod. (El p. 23)
-
Disassemble the hydrostop unit. (HI p. 24)
-
Disassemble the seal ring retainer. (El p. 24)
-
Check the fork legs, (EJS p. 25)
-
Assemble the seal ring retainer. (El p. 26)
-
Assemble the hydrostop unit. (El p. 26)
-
Assemble the piston rod. ( p. 27)
-
Assemble the cartridge. (El p. 28)
-
Assemble the fork legs, (il p. 29)
I
<o
1
a
i
4?
B00462-01
6.9
Disassembling the fork legs
Info
The procedures are the same on both fork legs.
I
Condition
The fork legs have been removed.
-
Note down the current state of rebound damping O REB (red adjuster of right
fork leg).
-
Note down the current state of compression damping
©
COMP (white adjuster
of left fork leg).
-
Open the adjusters of the rebound and compression damping completely.
©
©
201699-10
Clamp the fork leg in the area of the lower triple clamp.
©
Clamping stand (T1403S) (El p. 333)
Remove screw
0
Remove adjuster.
&
201700-10
Loosen the screw cover ©.
©
Special socket (T14047) (El p. 334)
Info
The cartridge cannot be taken off yet.
I
201701-10
Advertisement
Table of Contents
