Table of Contents
Advertisement
18 ENGINE
173
I
Press the crank pin out of the crankweb.
garil
ge-_a 'r
i
311903-10
Press in new crank pin © all the way.
©
• Info
The crank pin must be pressed in so that oil channel
o
is aligned with oil
A
s-i
channel ©.
If the oil channels are not correctly aligned, the conrod bearing will not be
supplied with oil.
©
&
Blow compressed air through the oil channel to check that it is clear.
311867-10
Thoroughly
oil
bearing
©.
Mount connecting rod
0
'
©
O
z
Jjt
311868-10
Position special tool on the press.
O
Pressing tool for crankshaft, complete (75029047000) (ii p. 326)
Position special tool ©.
Cover, crankshaft pressing tool (76629047003) (iS p. 329)
©
311904-10
Insert the crankweb with the connecting rod and bearing. Position the second
crankweb.
^
u
U
311905-10
Position special tool © with the heel pointing down.
©
Pressing tool for crankshaft, complete (75029047000) (iS p. 326)
Press in the upper crankweb as far as possible.
Info
The press mandrel must be positioned over the crank pin.
i
9
Take the crankshaft out of the special tool and check that the connecting rod can
move freely.
311906-10
Advertisement
Table of Contents
