Installing The Engine - Husqvarna 701 Enduro 2017 Repair Manual

18 ENGINE
148
18.2 Installing the engine
Preparatory work
- Lift the engine onto the special tool and secure it.
Floor jack attachment (75029055000) (S3 p. 327)
v
Main work
- Position the engine in the frame.
/
> t
£ D02807-10
FI
Mount the swingarm pivot.
Mount screw O of swingarm pivot but do not tighten yet.
Mount fitting
0
of the lower engine attachment but do not tighten yet.
s'm
\ \
1
\
Info
The help of an assistant is useful in this step.
Make sure that the engine is sufficiently secured against falling over.
Protect the frame and attachments against damage.
I
m
-•*
D02806-11 __
Remove the floor jack with the special tool.
Floor jack attachment (75029055000) (S3 p. 327)
I
v
D02804-10
Position the engine bearer.
Mount and tighten screws
@
Guideline
xm
mm
a
45 Nm (33.2 Ibf ft) Screw, engine bearer on frame M10
Mount and tighten fitting ©.
Guideline
.
m
l-A WSj
Loctite® 243™ Engine carrying screw M10 45 Nm
(33.2 Ibf ft)
t
fm
1
9
1
D02803-11
Tighten screw O °f swingarm pivot.
Guideline
Screw, swingarm pivot M12 80 Nm (59 Ibf ft)
Tighten fitting of the lower engine bracket.
Guideline
Loctite® 243™ Engine carrying screw M10 45 Nm
(33.2 Ibf ft)