HP ProLiant ML30 Gen10 Plus Maintenance And Service Manual page 86

If the server is in rack mode, remove the server from the rack .
5. Remove the access panel .
6. Remove the air baffle .
7. Remove the M.2 SSD.
Retain the screw for installing the new M.2 SSD.
To replace the component, reverse the removal procedure.
Removing and replacing the iLO-M.2-serial module Removing and replacing the iLO-M.2-serial module
CAUTION: CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 86